In the using process, the tanks that are water-repellent, chemical-absorbent or corroded by chemicals can cause damages and danger to humans and the surrounding environment. Consequently, it is required to deal with this problem. And FRP composite coating is considered the most optimal solution to handle this phenomenon. Future Development Solutions Joint Stock Company is specializing in composite coatings (FRP-FRP Ling) for all materials, all products in need of resisting chemical corrosion.
Composite coating is an effective solution to corrode materials in the chemical, food and pharmaceutical industries. Composite coating can be applied to all materials such as steel, stainless steel, concrete and many other materials. To make composite coatings satisfactory in some specific applications, we must use the concrete steel tanks
Composite coating process
1.Preparation construction drawings.
- Construction locations - Number of glass layers at each specific location
2.Prepare of construction site. - Determine construction locations - Prepare safety and protection equipment
3. Cleaning - Inspection before composite coating - FRP
- Clean the construction site
- Check for unsatisfactory locations
- Treat the surface before implementation
4.Lining.
- Mix the liner as the ratio required
- Apply a thin liner as standard
- Wait for the liner to dry, proceed the next lining
. 5. Fiberglass coating.
- Cut fiberglass as the size required
- Mix the substrate as the ratio required
- Stick the fiberglass to the surface, avoid air bubbles and bulges
- Roll resins
6. Next fiberglass layer coating.
- Execute the next layers like the first one
- Executive until the required number of layers
7. Perform surface treatment before coating.
- Check for uneven positions
- Use a grinder to sharpen protruded and use stone powder for concave positions.
8. Surface coating.
- Mix color as required
- Roll over the surface
9. Cleaning before handover.
- Wait for the surface to dry
- Clean before handover
Outstanding advantages of composite coatings compared to other materials and anti-corrosion methods: - Ability to withstand all chemicals of composite coatings is very good, it can withstand the high concentration of concentrated acids and bases.
- Composite coatings have excellent mechanical properties due to the reinforcement of fiberglass
- Unlike using PVC, PE, PP, there is no welding line in composite coating, so leakage at the welding line can be avoided.
- Simple repair: Allow to weld and repair on-site.
- Allow to apply composite coating on site
- Allow to apply with products with complex surfaces as well.
- Light weight, easy to transport
- With insulating, safe for the users
Why should you choose Fudeso???
We have 5 years of experience in the research, development and processing of composite fiberglass tanks and components made of composite materials ERF and composite coatings against the corrosion of chemical tanks
We have a whole process of product control from the stage of receiving customers' information until the product is finished and handed over to the contractors. Thereby, defects of the products are minimized. Especially, we always strictly control material norms used to manufacture FRP tanks and FRP components such as: percentage of polyester resin, fiberglass, curing agent ... in order to not onlly improve mechanical properties and lower production costs but also ensure the quality of Jokaso standards of Japan.
.jpg)
.jpg)
