Hotline (+84) 24 3206 3222[email protected]

What is an exhaust gas absorption tower (wet scrubber)?

Posted 22/11/2026
What is an exhaust gas absorption tower (wet scrubber)?

An absorption tower, or wet scrubber, treats exhaust gas by bringing it into contact with an absorbing liquid. Toxic gases, acid and alkaline vapours and odorous gases dissolve in or react with the liquid and are captured.

How it works

  1. A fan draws the gas into the bottom of the tower, flowing against the liquid sprayed from the top through nozzles.
  2. Packing increases the gas-liquid contact area so pollutants dissolve or react with solutions such as NaOH, H₂SO₄ or NaClO.
  3. The gas passes a mist eliminator and is discharged by the fan.
  4. The liquid is recirculated by a chemical pump to cut operating cost.

Gases and industries

Used for HCl, H₂SO₄, NH₃, Cl₂, H₂S, SO₂, NOx and similar gases in chemicals, plating, food, pharmaceuticals, plastics, rubber, wastewater treatment and agro-processing.

Absorption vs activated carbon adsorption

  • Scrubber: liquid-based, suits acid, alkaline, water-soluble and odorous gases.
  • Activated carbon tower: captures VOCs and odours on carbon, e.g. in painting, printing and electronics; carbon is replaced when saturated.

FUDESO builds tower bodies in corrosion-resistant FRP. Industrial emissions follow QCVN 19:2024/BTNMT from 1 July 2025; see the regulation library and industrial exhaust gas treatment.

Request a consultation

A FUDESO engineer will get back to you soon to discuss and arrange a site survey.

Hotline (+84) 24 3206 3222
Get directions

ZaloConsult