
FRP tanks, fabrication and composite lining
FUDESO fabricates FRP composite tanks for wastewater and industrial use, adds manhole neck extensions, and applies composite lining for protection against chemical corrosion.
What is an FRP tank, and what does FUDESO do with composites?
FRP (fiberglass-reinforced plastic) is a composite material made of a resin matrix and reinforcing glass fiber. It offers high mechanical strength, light weight and resistance to chemical corrosion. FUDESO fabricates FRP composite tanks for wastewater treatment systems (Johkasou tanks, septic tanks, on-site treatment tanks) and for industrial applications. It also applies composite lining to tanks and basins made of steel, stainless steel or concrete to protect them against corrosion.
Among reinforcing fibers, E-glass fiber is the most common type. See also: FRP tank fabrication.
Installing FRP tanks: buried, above-ground or semi-buried
FRP tanks produced by FUDESO are designed for several installation conditions: fully buried underground, placed above ground, or half-buried, depending on actual needs and the characteristics of the project. The tank shell is coated with a specialized UV-resistant paint to limit material aging caused by sunlight and harsh environments.
- Flexible installation: buried, above-ground or semi-buried.
- UV-resistant, suitable for outdoor weather conditions.
- Lightweight, durable FRP material resistant to chemical corrosion.
- Suitable for water treatment, industrial, agricultural and storage systems.
Example: half-buried FRP tank, Pyi Kyaw Hospital, 5 m³
Extending the manhole neck of FRP tanks
For projects that require a higher manhole neck, or a deeper tank burial to achieve the slope needed for natural gravity flow into the system, FUDESO offers a manhole neck extension option. The neck can be extended up to 300 mm. It is designed as detachable modules for quick installation on site, and it is convenient to pack and transport by container. See details of the manhole neck extension option.
Composite lining for protection against chemical corrosion
Tanks and basins made of steel, stainless steel or concrete can leak or be corroded by chemicals. FRP composite lining is a remedy that can be applied on site to steel, stainless steel, concrete and many other materials, including on complex surfaces. The lining has no welded seams, so it avoids leaks at weld joints, and it can be repaired by adding another lining layer on site.
The lining process consists of 9 steps:
- Prepare construction drawings (positions and number of glass layers at each location).
- Prepare the construction site.
- Clean and inspect before coating.
- Apply the primer layer.
- Apply the first glass fiber layer.
- Apply further glass fiber layers up to the required number.
- Treat the surface before applying the topcoat.
- Apply the topcoat.
- Clean before handover.
See details: Composite lining for protection against chemical corrosion
Frequently asked questions
How can FUDESO's FRP tanks be installed?
Fully buried underground, placed above ground, or half-buried, depending on actual needs and project conditions.
Why is the FRP tank shell coated with UV-resistant paint?
The specialized UV-resistant coating helps limit material aging caused by sunlight and harsh environmental conditions.
How far can the manhole neck of an FRP tank be extended?
Up to 300 mm. The neck extension is designed as detachable modules for quick installation on site and for convenient packing and transport by container.
Which materials can composite lining be applied to?
Steel, stainless steel, concrete and many other materials, applied on site, including on complex surfaces.
What are the steps of the composite lining process?
Nine steps: prepare construction drawings, prepare the site, clean and inspect, apply the primer, apply the first glass fiber layer, apply further layers, treat the surface, apply the topcoat, and clean before handover.
How does composite lining differ from assembling tanks from PVC, PE or PP?
Composite lining has no welded seams, so it avoids leaks at weld joints, and it allows repair by adding another lining layer on site.
Completed projects
All projects →Request a consultation
A FUDESO engineer will get back to you soon to discuss and arrange a site survey.
Hotline (+84) 24 3206 3222




