
A packaged domestic wastewater treatment module (also called a Johkasou or Jokaso module) is a factory-made FRP tank containing all biological treatment chambers. Dig, place the tank, connect pipes and power, and it is ready to run.
Sizing by number of users
| Capacity | Users (guide) | FUDESO model |
|---|---|---|
| 1.5–2 m³/day | 8–10 people | FS-S-8P / FS-S-10P |
| 3 m³/day | 15 people | FS-S-15P |
| 2 to under 10 m³/day | 11–50 people | FS-A-xP or FS-B-xP |
| 10 m³/day or more | 51 people or more | FS-A-xP, FS-B-xP (MBBR), FS-H-xP (MBR) or combined modules |
User numbers are a starting point; engineers recalculate from actual water use, peak hours and a safety margin.
MBBR or MBR?
- MBBR (moving bed biofilm): simple to operate, tolerant of load peaks, suits most domestic wastewater.
- MBR (membrane bioreactor): more compact, higher effluent quality suitable for reuse; good where space is limited.
What to check
- Compliance: from 26 February 2026 on-site equipment must meet QCVN 98:2025/BNNMT; effluent must meet QCVN 14:2025/BTNMT. See the regulation library.
- Tank material: glass-fibre reinforced FRP, strong enough for burial, UV-coated if installed above ground.
- Inlet depth: for deep burial, ask about manhole extensions (FUDESO extends up to 300 mm).
- Operation and maintenance: blowers, pumps, sludge removal and after-sales maintenance.
Request a consultation
A FUDESO engineer will get back to you soon to discuss and arrange a site survey.
Hotline (+84) 24 3206 3222


